KEY FEATURES AND BENEFITS
- Manufactured with a premium polyurethane resin, resulting in a more durable sealer than other solvent based sealers using acrylic resins
- Gives concrete superb long term protection
- Provides a tough and durable high-performance seal coating
- Will not blister or peel, hardens & seals concrete permanently
- Reduces efflorescence from concrete
- Resists oil and stain penetration
- Easy to apply with a roller or sprayer
- Long lasting and made with premium polyurethane resins
The recommended products used to apply this product are in the description below and highlighted in Blue.
PRODUCT DESCRIPTION
Everest Trade Paints Concrete Sealer is a solvent-borne, polyurethane resin-based sealer with exceptional effectiveness, This sealer will provide a heavy-duty, long-lasting clear seal coating with a satin / wet look finish.
This product can be used internally (good ventilation required) and externally on domestic and industrial surfaces due to it's heavy-duty polyurethane resin base.
Its penetration comes about by solvent evaporation, Penetrating into the concrete to protect the surface from oil and water infiltration while also dustproofing the surface.
100% UVA resistant, resistant to tyre plucks and provides high resistance to oil stains, foot and vehicle traffic and water damage.
Maintains the performance life of the concrete. Yields significant whole life cost savings and reduces interim maintenance.
Made in England with Premium PU Resins.
More durable than other "
solvent-based" sealers that use an inferior acrylic resin.
COMPATIBLE PRODUCTS
USES AND SURFACE COMPATIBILITY
Suitable for use on internal and exterior concrete floors and driveways.
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
SPREADING RATE
-
First coat: Approximately 4 square meters per litre.
-
Second coat: Approximately 6 square meters per litre.
This is a rough estimate and varies depending on the condition of the driveway and amount applied with each coat.
DRYING TIME
Under normal conditions, it is touch dry in approximately 4 hours.
Do not drive on the surface for 24 hours after the last coat.
APPLICATION
Apply by brush, roller, conventional H.V.L.P or airless spray.
We have compatible application tools here.
We recommend you apply 2 coats of this sealer for the best performance and finish.
STORAGE PRECAUTIONS
Store away from heat and naked flames. Secure lid between uses to prevent paint hardening. Store away from frost.
THINNERS
Thinners aren't required with this product, use white spirits or proprietary brush clear for cleaning.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, 100% dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.
