SUMMITSEAL™ SEALER REPAIR FLUID
SummitSeal sealer repair fluid is as the name suggests a solvent-borne repair fluid that will easily correct issues if the xylene based imprinted concrete or block paving sealers have been applied in conditions when the surface is damp this can lead to problems. Surface whiteness is the most common issue and appears over time if the sealer has been applied when the surface is damp. This product will remove xylene based sealers from the surfaces applied to.
This product can repair/fix the following products:
SUMMITSEAL - BLOCK PAVING SEALER - SATIN - HIGHLY DURABLE, SAND HARDENER - TRADE GRADE
SUMMITSEAL - BLOCK PAVING SEALER - MATT - HIGHLY DURABLE, SAND HARDENER - TRADE GRADE
SUMMITSEAL - IMPRINTED CONCRETE SEALER - SATIN / WETLOOK - HIGHLY DURABLE - TRADE GRADE
SUMMITSEAL - IMPRINTED CONCRETE SEALER - MATT - HIGHLY DURABLE - TRADE GRADE
This product should be used when problems like patchy whiteness have appeared on the surface of existing imprinted concrete or block paved driveways and patios. Surface whiteness, peeling or flaking sealer are common issues that are easily corrected using sealer repair fluid.
USES AND SURFACE COMPATIBILITY
Suitable for use on concrete, block paving and imprinted concrete.
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
- First coat: Approximately 3 square meters per litre.
- Second coat: Approximately 4 square meters per litre.
This is a rough estimate and varies depending on the condition of the driveway and the amount applied with each coat.
Under normal conditions, it is touch dry in approximately 3-4 hours.
Do not drive on the surface for 24 hours after the last coat.
Store away from heat and naked flames. Secure lid between uses to prevent paint hardening. Store away from frost.
Thinners aren't required with this product, use xylene or proprietary brush clear for cleaning.
Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.
Files and Data Sheets
One Part / Single Pack
Item is Clear
Please See Product Description
Apply By Brush, Roller, Conventional H.V.L.P or Airless Spray.
Approximately 3 - 4 Square Metres Per Litre Per Coat
2 - 4 Hours at 18°C
4 Hours at 18°C
Cleaner / Thinner:
Clean up with Xylene, Do not thin
Available in 5, 20, *200 and *1000 Litre Variants
*This is intended to be used as a rough guide only and is based on the average coverage of this product, the actual coverage on your surface may vary widely depending on your surface porosity.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
- Opens in a new window.