BENEFITS AND KEY FEATURES
- Provides a high-performance seal coating
- Highly durable solvent-based acrylic sealer
- Provides a durable SATIN finish (click here for the MATT finish)
- Resists oil and stain penetration
- Can be used in domestic, industrial and commercial environments
- 100% UV fade resistant
- Harden's sand joints to prevent weed formation
- Prevents moss, algae and lichen formation
- Inhibits weed and algae growth
- The main sealer type used by the trade professionals
If you're looking for a sealer that's has a little less sheen click here to view the matt version of this item.
PRODUCT DESCRIPTION
SummitSeal Block Paving Sealer is a solvent-borne, premium resin-based sealer and jointing sand stabiliser with exceptional effectiveness. that will provide a heavy-duty, long-lasting clear seal coating with a satin / wet look finish.
Its penetration comes about by solvent evaporation, penetrating into the blocks and bind the particles of sand to form an elastomeric joint and protect the paver face from oil and water infiltration.
The sealer prevents moss and weed formation when applied correctly, joints should be re-sanded for optimum results.
100% UV light fade resistant, resistant to tyre plucks and resists oil stains, colour loss of the blocks and water damage.
Suitable for - commercial, public or industrial premises with heavy to extremely heavy traffic, this product is also perfect for use on residential driveways for customers that want an extra hard-wearing product.
Maintains the performance life of the pavement. Yields significant whole life cost savings and reduces interim maintenance.
USES AND SURFACE COMPATIBILITYSuitable for use on block paving, brickwork and concrete.
COMPATIBLE PRODUCTS
Driveway Cleaner - Everest Trade Ultimate Driveway Cleaner
Oil Stain Remover - Everest Trade Oil Stain Remover
Efflorescence Remover -
Everest Trade Efflorescence and Salts remover SPECIAL PROPERTIESIt is easily cleaned and will withstand regular washing. Also resistant to most oils.
SPREADING RATE
-
First coat: Approximately 4 square meters per litre.
-
Second coat: Approximately 6 square meters per litre.
This is a rough estimate and varies depending on the condition of the driveway and the amount applied with each coat.
DRYING TIME
Under normal conditions, it is touch dry in approximately 3-4 hours.
Do not drive on the surface for 24 hours after the last coat.
APPLICATION
Brush, Roller, or Sprayer.
Sprayers will provide the best results due to there being less chance of interfering with the sanded joints.
Rollers and brushes are fine for application, be careful when going over joints for best results.
We have compatible application tools on our website.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
STORAGE PRECAUTIONSStore away from heat and naked flames. Secure lid between uses to prevent paint hardening. Store away from frost.
THINNERSThinners aren't required with this product, use xylene or proprietary brush clear for cleaning.
SURFACE PREPARATIONEnsure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.
