KEY FEATURES AND BENEFITS
-
One coat application to saturation (for best results apply a 2nd coat when the first coat has fully dried)
-
Enhances natural colours in the stone leaving a premium satin finish
- Fully seals and protects the patio against UV light to prevent fading
- Revives your old patio to bring them back to their original colour
- Resists oil and stain penetration
- Durable, long-lasting sealer
- Inhibits mould, lichen and algae growth
- Average coverage of 5-7 square meters per litre
-
Lifespan of up to 5 years can be expected
The recommended products used to apply this product are in the description below and highlighted in Blue.
PRODUCT DESCRIPTION
Everest Trade Paints - Ultimate Limestone Sealer is a durable, quick-drying, impregnating sealer for use on Indian sandstone, natural stone, limestone, granite and slate.
It's highly effective impregnating formula means that this is sealer provides a durable, long-lasting (lifespan of up to 5 years) coating with excellent water repellency, stain and algae resistance and great wear resistance while also providing a premium satin finish to the surface.
This product enhances the colour of the patio while protecting the surface from staining, UV light, mould and algae growth and will increase abrasion resistance while also protect the pointing of the patio from erosion and weed infestation to reduce maintenance.
Easy to apply by a roller or sprayer, gives additional protection to your patio slabs.
USES AND SURFACE COMPATIBILITY
Suitable for use on interior and exterior surfaces made from Indian sandstone, natural stone, limestone, granite and slate.
Not to be used on areas grouted with Easy grout or other resin based grouts.
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most stains and oils.
SPREADING RATE
-
First coat: Approximately 5 square meters per litre.
-
Second coat: Approximately 7 square meters per litre.
This is a rough estimate and varies depending on the condition of the patio/surface and amount applied with each coat.
DRYING TIME
Under normal conditions, Sealer is touch dry in approximately 2-4 hours.
Do not drive on the surface for 24 hours after the last coat.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil, efflorescence and grease.
This product is not suitable if surfaces have been treated previously with a silicon or stearate based water repellent
If applying on exterior surfaces, please ensure no rain is forecast and the surface is completely bone dry before application.
APPLICATION
Brush, Roller, or Sprayer.
We have compatible application tools Here.
Always test a small area before use to ensure compatibility and that the finished result is acceptable
Do not pour the product directly on to the surface of the paving
Apply in thin, even coats to avoid any issues with the finish and to prevent problems with whiteness.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
Do not allow the product to pool or the final appearance may not be even in colour on the paving to be enhanced and sealed.
STORAGE PRECAUTIONSStore away from heat and naked flames. Secure lid between uses to prevent sealer hardening. Store away from frost.
THINNERSThinners aren't required with this product, w
arm soapy water can be used for clean up.
